[tp widget="default/tpw_default.php"]

how to remove dvd security tag

how to remove dvd security tag插图

How do you remove the bottom part of a security tag?

You need to remove the cap and balls. Once that is done the bottom part of the security tag can be removed safely. It helps to have some long nose pliers to remove the cut pieces of plastic as the Dremmel cutter works. It heats the plastic up from the friction and melts it so the cuts are a little jagged.

How do I remove the red tag from a DVD?

Cut thin plastic cover from DVD. Remove (undamaged) DVD paper cover. Push the Red Tag in with your thumb (its natural position, or if you have attempted to pull it out, prevents it from opening as it catches on the case on the way out, so you need to push it in and hold it just gently in while you perform the next step).

How do you open a security tag with a magnet?

One person moves the magnet over the security label, the other tries to open it with pliers at the same time. In another method with a magnet, place it on the table and position the tag bottom side down on the magnet. You should hear it click.

What is a security tag on a package?

This is usually a mechanical tag with with ink in a small glass tube that breaks if the label is opened with force. Since this security is expensive and also involves the risk that a large amount of goods will be spoiled if it is accidentally triggered, these types of security tags are rarer than the other kinds.

How does a dremel cutter work?

It helps to have some long nose pliers to remove the cut pieces of plastic as the Dremmel cutter works. It heats the plastic up from the friction and melts it so the cuts are a little jagged. As long as you don’t pull on the pin you have no chance of setting the dye loose.

How does a pin release dye?

The pin serves as the "hammer" and rests on the glass. When the pin is pulled hard, it breaks the glass and the dye comes out .

Why does a plastic dome spin?

The plastic dome spins around so if you try to use a knife on it it will just spin and you will likely stab yourself. Likewise trying to use pliers or some similar tool doesn’t work because it just slips off the dome. If you tried to saw it with a hand saw, again it would just spin around.

How does a security tag spring work?

The spring allows the balls to move out when the pin is inserted but then it grabs and holds it once the pin is in place. You need to remove the cap and balls. Once that is done the bottom part of the security tag can be removed safely.

Where did the name Vyger come from?

About: The name comes from the First Star Trek movie , that pretty much says it all. More About Vyger »

Can you freeze dye?

I read that some people have put them in the freezer to freeze the dye and then just pull them apart white it is frozen. I suppose that would work but any frozen dye coming into contact with the fabric would leave a stain. Better to just cut them off the way I showed you.

How to get anti theft tag out of fabric?

Try prying open the tag with a screwdriver without damaging the fabric, or at least break the plastic pieces with a hammer or vise. The smaller the remains of the anti-theft device, the better you can get it out of the fabric.

How long to freeze ink?

Freeze the garment for 24 hours to freeze the ink solid. After 24 hours, take it out of the freezer compartment. But that doesn’t help very mcuh with colored powder.If you think it might be a coloured powder tag, it is best to also protect the garment from the powder.

What to do if you can’t work out what kind of tag you have?

If you still can’t work out which kind of tag it might be, you can ask the store — as long s you have not thrown away your receipt. You can take a photo of the receipt and then phone customer service and email the photo to them while you are on the phone (they are usually quite happy to give you the email address).

What is a security tag?

This is usually a mechanical tag with with ink in a small glass tube that breaks if the label is opened with force. Since this security is expensive and also involves the risk that a large amount of goods will be spoiled if it is accidentally triggered, these types of security tags are rarer than the other kinds.

How to melt ink on a tag?

Freeze the garment and protect it with plastic as described above. Then add a second protective layer of aluminium foil over the plastic . Use a lighter or kitchen torch CAREFULLY to melt the top part of the cone on the ink tag. It should take about 15 seconds.

How to get a pin out of a magnet?

In another method with a magnet, place it on the table and position the tag bottom side down on the magnet. You should hear it click. Manipulate the pin up and down, and it should come out.

How to remove a label from a sleeve?

If the label is attached to the sleeve, use nail scissors or a quickunpick sewing tool to carefully cut the stitches of the seam. Remove the label and then sew the garment back together. If the anti-theft protection is attached in a place that cannot be cut open under any circumstances, the removal becomes much more complex.

Step 1: What You Need

These mysterious devices are rather simple devices. While they can be mutilated off with a pair of snips, a screwdriver and a pair of pliers, they can be removed much easier with a high powered magnet. I used a hard drive magnet and a light touch.
The purpose of this Instructable is for informational purposes only.

Step 2: Set Up

Security tags differ in shape and have various configurations but all utilize the same locking mechanism. Its a simple spring & and clip. That security device remover is nothing more than an electro magnet. Place your magnet on the table and position the tag bottom side down.
The purpose of this Instructable is for informational purposes only.

Step 3: The Removal

When you place the base of the tag down on the magnet, you will hear it click. Manipulate the pin up and down and it will come out.

Step 4: Legal Ramifications

Shoplifting is illegal. You can go to jail and face heavy fines. This Instructable is for informational purposes only. It is also not funny to slip a tag on your friends coat when you go to the mall…well, maybe a little.
Lex
The purpose of this Instructable is for informational purposes only.

Related Post