[tp widget="default/tpw_default.php"]

how to open dvd security cases

how to open dvd security cases插图

How to Open a DVD CaseAlign a magnet with the security magnet to the left of the locking bar.Align another magnet with the security magnet to the right of the lock.Slide both magnets to the right to unlock the internal magnets.Continue sliding until the red icon becomes green.Hold the DVD case by the locking bar to open the case like a book.See More….

How do I open a DVD case?

Hold the DVD case by the locking bar to open the case like a book. Once the DVD case is unlocked, you should be able to easily open the cover. Grip the locking bar from both the front and back of the DVD. Gently pull the cases apart to open your DVD. [4] Stick screwdrivers into both lock tabs near the locking bar.

How do you unlock a DVD case with magnets?

Unlocking with Magnets Align a magnet with the security magnet to the left of the locking bar. Align another magnet with the security magnet to the right of the lock. Slide both magnets to the right to unlock the internal magnets. Continue sliding until the red icon becomes green. Hold the DVD case by the locking bar to open the case like a book.

Where is the locking bar on a DVD case?

[1] The locking bar is an indented rectangle located on the edge of your DVD, used to help you open the case. Use any household magnet, like from your fridge. If your DVD case is clear, you should be able to see the small magnets. Align another magnet with the security magnet to the right of the lock.

How do I unlock the DVD case on my Samsung TV?

Drag the internal magnets, moving the DVD case lock from the “locked” to the “unlocked” position. You only have to move the magnets about 1 inch (2.5 cm) to the right. If your magnets do not unlock the case, try this again using stronger magnets. Continue sliding until the red icon becomes green.

How to unlock a DVD case?

Slide your middle screwdriver to the right to unlock the security feature. Make sure your lock tabs are both pressed in. With your screwdriver pressed against the plastic, slide the red lock to the right until it becomes the green unlocked icon. You should hear a click as the DVD case unlocks.

How to get lock tabs off a sandbox?

There are 2 small holes on the front and back cases about 2–3 inches (5.1–7.6 cm) down from the locking bar. You can access the lock tabs through these small holes. Insert a separate screwdriver into each of these small holes.

How to open a DVD that is locked?

Once your DVD is unlocked, you can open it by gripping the middle with each hand and separating the sides with your thumb!

Where is the magnet on a DVD?

A small, internal magnet, located to the left of the locking bar, is keeping the DVD locked. So to open up the case, you can place one magnet on the left, bottom side of the locking bar. Slide it around a little until you feel the magnets snap into place.

How far do you move magnets?

You only have to move the magnets about 1 inch (2.5 cm) to the right.

Where is the locking bar on a DVD?

The locking bar is an indented rectangle located on the edge of your DVD, used to help you open the case. Use any household magnet, like from your fridge. If your DVD case is clear, you should be able to see the small magnets. Align another magnet with the security magnet to the right of the lock.

How to open a display case at Walmart?

You could even have the incident go on your criminal history. If you need to access one of the display cases, ask a store employee to help you. They’ll be able to use the proper key that unlocks the case so you can safely and legally access it. If you can’t locate an employee, head to a register and ask them if they can contact someone to assist you.

What is the locking bar on a DVD?

The locking bar is not accessible from the outside of a locked DVD case. It has a magnet on each side and the default position of the magnets keeps the locking bar from moving from the position that it is presently in. This is where the magnets come in handy.

How to get magnets to stick to DVD?

1. Take the first magnet and place it in the upper right front corner of the DVD case. You may have to slide the magnet around a bit, but you should definitely feel it stick when you hit the right spot. You may also be able to hear the magnet in the locking bar click as it moves. 3.

Do laptop drives have magnets?

Generally, the older the drive, the larger and more powerful the magnets. Some new hard drives and some laptop drives have magnets which are too small and weak to use for this purpose. The other item that can come in handy here is a screwdriver with a small regular tip.

Step 1

Place the weaker magnet on the outside of the security device. This pulls a small metal piece located inside of the device flat against the outer portion of the lock, allowing you to slide it out by moving the magnet toward the open end of the device.

Step 2

Push the plastic of the device inward toward the DVD case. This aligns a metal bar inside it with its opening. Sometimes it becomes stuck or out of place due to previous mishandling. Misalignment prevents the metal from being removed.

Step 3

Place the stronger magnet on the outside of the device. Slide it along and toward the open end. This moves the metal bar outward. Pull the plastic portion of the device away from the DVD case as you are doing this. That allows the opening to widen for the removal of the metal bar.

Step 4

Remove the plastic portion of the security device from the DVD case. It should simply fall off after the final metal piece is removed.

Related Post